from superior cutlery grade steel, correctly hardened to hold an edge and tolerate repeated sharpening. Since 1877, Clauss
has been the choice for genuine industrial strength shears constructed for durability and long life.
Replacing solid metal handles with synthetic material results in shears that weigh considerably less. Lighter weight shears
require less pressure to use. The fatigue, muscle ache and risk of neuromuscular disease associated with repeated cutting
tasks is substantially reduced. Clauss
lightweight shears are made to industrial grade standards. Blade integrity, hardness and edge life, is as good or better than
traditional solid steel models, regardless of weight or gauge.
Select Clauss scissors and shears to accomplish
cutting tasks more easily, accurately and efficiently, with less effort and greater safety. All models have adjustable pivot
screws. Clauss fatigue reducing shears cut as well or better than solid steel models that weigh twice as much.
All Clauss ExtremEdge models are 55 HRC with a heat inducted edge
value of 58HRC.
Clauss 8" High-stress shears cut multiple plies of Kevlar!
Best choice for small shears guaranteed
to slice through difficult to cut materials.
|Leverage and power.
|Large comfortable handles.
* Blades made of high carbon stainless steel
alloy with added molybdenum and vanadium and thoroughly hardened to
* Correctly adjusted to cut multiple
plies of Kevlar, composites, carbon, glass and similar tough materials from pivot to tip.
Large, durable ergonomic cushion grip handles for control and comfort.
* Ambidextrous! Use with either right or
* Tension adjusting pivot screw. 8" x 2½"
Standard Models. Both blade edges serrated for a firm grip on the slipperiest
materials. For proper reconditioning of worn corrugations, shears should be returned to us.
||Pointed tips.||$21.00 |
|18425B ||Blunted safety tips.||$21.50|
Modified Models. One keen
blade edge and one serrated blade edge. Allows convenient sharpening of worn cutting blade.
|18425ASB||Blunted safety tips. ||$22.50|
If you are cutting composites, glass fibers or Kevlar, note that mineral fibers are very abrasive
and tend to wear blade edges at a different angle than Kevlar does. While the same pair of scissors or shears used to cut
fiberglass may be used to cut graphite (carbon) fibers, avoid using them to cut Kevlar.
Keep Blades Clean. When finished cutting, always clean residual fibers from blades. Acetone is recommended
for dissolving and removing prepreg resins, urethane, adhesives, epoxies etc.
|Strong stainless steel blades.
|Left hand model.
ergonomic nylon handle designed for comfort.
|18320 Shears. Pointed tips. 8" x 3" cut.||$10.70|
|18320K Knife edge.||$11.60|
|18320S Serrated integral blade.||$11.60|
|18320SK Serrated, knife edge.||$12.15|
|18320DS Both blades serrated.||$12.15|
|18320B Blunted safety tips.||$11.35|
|18320BK Knife edge.||$11.90|
|18320SB Serrated integral blade.||$11.90|
|18330SBK Serrated, knife edge.||$12.45|
|18320DSB Blunted, both blades serrated.||$12.45|
CLAUSS ExtremEdge Titanium Bonded Bent Shears
* Unique titanium bonding process thoroughly penetrates
blades, not merely surfaces.
* Rockwell C58
blade edges are 3X harder than stainless steel to stay sharp longer.
* Resistant to corrosion and adhesives.
* Knife edge blades cut multiple plies of textile fabrics.
* Large, comfortable ergonomic
handles made of glass-filled nylon.
* Hex Key tool included for adjusting
tension to suit material being cut.
* Available with serrated blades
for slippery synthetics and blunted tips for safety
|Cuts multiple plies of fabric.
|Extra sharp knife edge.
ExtremeEdge TI 9" x 3¾"
|18078K Knife edge.||$12.10|
|18078S Serrated integral blade.||$12.10|
|18078SK Serrated, knife edge.||$12.80|
|18078DS Both blades serrated.||$12.80|
|18078B Blunted tips.||$11.70|
|18078BK Blunted, knife edge.||$12.40|
|18078SB Serrated, blunted.||$12.40|
|18078SBK Serrated, blunted, knife edge. ||$13.10|
|18078DSB Blunted, both blades serrated.||$13.10|
|18091 ExtremeEdge TI 8" x
|18091K Knife edge.||$9.50|
|18091S Serrated integral blade.||$9.50|
|18091SK Serrated, knife edge.||$10.05|
|18091DS Both blades serrated.||$10.05|
|18091B Blunted tips.||$9.30|
|18091BK Blunted, knife edge.||$9.85|
|18091SB Serrated, blunted.||$9.85|
|18091SBK Serrated, blunted, knife edge.||$10.35|
|18091DSB Blunted, both blades serrated.||$10.35|
TiN coated shears are particularly suited to cutting materials containing cements, adhesives or resins
that tend coagulate into thick, sticky gum causing ordinary blades to become inoperable.
CLAUSS Titanium Bonded Ultraflex Bent Shears
* Blades are 3x harder than stainless steel to
stay sharp longer.
* Large, soft and flexible finger bows help reduce fatigue.
* Oversize blades have knife edges to cut muti-plies.
* Tension adjustable pivot
* Available with serrated blades for slipppery synthetics and blunted tips for safety.
|Extra sharp knife edge blade.
TiN 9" x 3¾" cut.||$7.90|
|18080K Knife edge.||$8.90|
|18080S Serrated integral blade. ||$8.90|
|18080SK Serrated, knife edge.||$9.60|
|18080DS Both blades serrated.||$9.60|
|18080B Blunted tips.||$8.50|
|18080BK Blunted, knife edge.||$9.20|
|18080SB Serrated, blunted.||$9.20|
|18080SBK Serrated, blunted, knife edge.||$9.90|
|18080DSB Blunted, both blades serrated.||$9.90|
|18081 Ultraflex TiN 8" x 2½" cut.||$5.45|
|18081K Knife edge.||$6.15|
|18081S Serrated integral blade. ||$6.15|
|18081SK Serrated, knife edge.||$6.85|
|18081DS Both blades serrated.||$6.85|
|18081B Blunted tips.||$5.75|
|18081BK Blunted, knife edge.||$6.45|
|18081SB Serrated, blunted.||$6.45|
|18081SBK Serrated, blunted, knife edge.||$7.15|
|18081DSB Blunted, both blades serrated.||$7.15|
|Egonomic handles for extra comfort.
|Industrial strength shears.
Ultraflex TiN 10" x 4½" cut.||$10.15|
|18517K Knife edge.||$11.20|
|18517S Serrated integral blade.||$11.20|
|18517B Blunted tips.||$10.80|
|18517BK Blunted, knife edge.||$11.50|
|18517SB Serrated, blunted.||$11.50|
|18517SBK Serrated, blunted, knife edge.||$12.20|
CLAUSS Titanium Bonded Spring Assisted Bent Shears
* Blades are 3x harder than stainless steel to
stay sharp longer.
* Internal spring assists extra large non-slip
handle for ease of use.
* Integral lock for safety.
* Tension adjusting pivot screw for optimal performance.
* Available with serrated blades for slipppery synthetics and blunted tips for
|Spring operated for ease of use.
|Non-slip comfort RipGrip handle.
addition to resisting rust and corrosion, these shears reduce hand
fatigue associated with cutting materials containing cements, adhesives or resins, materials that tend to coagulate into
thick, sticky gum causing ordinary blades to become inoperable. Result is longer lasting blades.
|18073 TiN Spring Assisted
9" x 3" cut.||$13.05|
|18073S Serrated integral blade.||$14.25|
|18073B Blunted tips||$13.85|
|18073SB Serrated integral blade. Blunted tips. ||$14.55|
Clauss High Leverage
|Corrugated notch at pivot.
|Blades close precisely.
* Correctly hardened rustproof stainless
steel blades.* Comfortable, extra
large, high leverage, ambidextrous handles.
* Serrated integral
blade with large corrugations at pivot assures a tight grip on any material.
* Strong fixed pivot never needs adjusting.
* Ideal for Kevlar and similar difficult to cut material.
Good choice for auto upholstery and headliner trimming,
rubber flashing, cordage.
CLAUSS 3321009 Scissors.
Pointed tips. 7" x 1¾". $11.20
CLAUSS Titanium Bonded Flex Bow Scissors
* Blades are 3x harder than stainless
steel to stay sharp longer.
* Extra large
fatigue reducing flexible handles for comfortable cutting.
* Choose for trimming fringe, lose ends or cutting yarn and sewing thread.
* Available with serrated blades for slipppery synthetics and blunted
tips for safety.
|18084 TiN Flex Bow
6" x 2½" cut.||$10.70|
|18084S Serrated integral blade.||$11.60|
|18084B Blunted tips||$11.35|
|18084SB Serrated integral blade. Blunted tips. ||$11.90|
CLAUSS Kevlar Scissors
|Light and strong.
Clauss Kevlar Scissors.
High carbon stainless
steel blades. Micro-serrated to correctly grip and cut Kevlar strands, soft cable, wire ties, electrical tape and stripping wire. Adjustable tension. Ergonomic glass-filled nylon handle. Lifetime Warranty.
|Clauss 18074 Scissors.
5¼" x 1½" cut.||$11.25|
|Clauss 18074B Blunted safety tips.||$11.95|
CLAUSS SOLID FORGED SHEARS
* Industrial grade models produced from hot-hammer forged
high-carbon cutlery grade steel.
* Thoroughly heat treated
and tempered for stronger, longer lasting edges.
* Double plated chrome over nickel for superior resistance
to rust and corrosion.
* SureSet® premium adjustable pivot screws for easy tension adjustment.
BIG BOW SHEARS
oversize blades model with large non-slip coated handles, is the choice for cutting upholstery, drapery, carpet, canvas, rubber,
roofing and similar thick or dense materials.
|Popular tailor's shears.
|20 ounces (0.6 kg.) of cutting power.
|18067 Shears. Pointed tips. 11½" x 4⅝" cut.||$35.50|
|18067K Knife edge.||$37.35|
|18067S Serrated integral blade.||$37.35|
|18067SK Serrated, knife edge.||$38.05|
|18067B Blunted safety tips.||$36.95|
|18067BK Knife edge.||$37.65|
|18067SB Serrated integral blade.||$37.65|
|18067SBK Serrated, knife edge.||$38.35|
|Blunted safety tips.
|Serrated blade edge.
|Most popular bent shank model.
|Cutting room favorite.
|10740 Shears. Pointed
x 5" cut.||$29.90|
|10740K Knife edge.||$31.65|
|10740S Serrated integral blade.||$31.65|
|10740SK Serrated, knife edge.||$32.35|
|10740B Blunted safety tips.||$31.25|
|10740BK Knife edge.||$31.95|
|10740SB Serrated integral blade.||$31.95|
|10740SBK Serrated, knife edge.||$32.65|
LEFT HAND MODELS
|10770 Shears. Pointed tips. 10" x 5" cut.||$34.70|
|10770K Knife edge.||$36.55|
Serrated integral blade.||$36.55|
|10770SK Serrated, knife edge.||$37.25|
|10770B Blunted safety tips.||$36.20|
|10770SB Serrated integral blade.||$36.90|
|10770SBK Serrated, knife edge.||$37.55|
|Popular multi-purpose 8" model.
|Number and Description||Posted||On Sale|
|10721 Pointed tips. 8" x 4"
|10721K Knife edge. ||$17.60||$12.35|
|10721S Serrated integral blade.||$17.60||$12.35|
|10721SK Serrated, knife edge.||$18.15||$13.10|
|10721B Blunted safety tips.||$17.40||$12.00|
|10721BK Knife edge.||$17.95||$12.80|
|10721SB Serrated integral blade.||$17.95||$12.80|
|10721SBK Serrated, knife edge.||$18.45||$13.55|
High Leverage Shears
Longer shanks and shorter blades for maximum cutting power. More
efficient than regular straight trimmers. Select for cutting thick or dense materials.
|Longer shanks, shorter blades, more power.
|Clauss 11200C high leverage shears.
Shears. Pointed tips. 8.5" x 2.75" cut.||$16.15|
|11200CS Serrated integral blade.||$17.25|
|11200CSK Serrated, knife edge.||$17.75|
|11200CB Blunted safety tips.||$17.00|
|11200CBK Knife edge.||$17.55|
|11200CSB Serrated integral blade.||$17.55|
|11200CSBK Serrated, knife edge.||$18.10|
Extra High Leverage Model. Powerful
cutters ideal for zippers, cordage, leather belting, webbing.
|More power, less fatigue.
|Strong, heavy gauge steel.
|11100C Shears. Pointed tips. 7¾" x 2" cut.||$14.90|
|11100CK Knife edge.||$15.95|
|11100CS Serrated integral
|11100CSK Serrated, knife edge.||$16.50|
|11100CB Blunted safety
|11100CBK Knife edge.||$16.30|
|11100CSB Serrated integral
|11100CSBK Serrated, knife edge.||$16.85|
Off-set pattern. For trimming carpet tufts and flush
|Keeps fingers from contact with tufts.
|Blades conform to pile surface.
|11240 Shears. Pointed tips. 8¼"
x 2⅞" cut.||$18.70|
|11240K Knife edge.||$20.05|
|11240S Serrated integral
|11240SK Serrated, knife edge.||$20.75|
|11240B Blunted safety
|11240BK Knife edge.||$20.35|
|11240SB Serrated integral
|11240SBK Serrated, knife edge.||$21.05|
John A. Eberly, Inc.
Textile and Sewing Scissors and Shears
Industrial Tools and Supplies
Box 8047 Syracuse